RUIAN LOYAL MACHINERY CO., LTD.
RUIAN LOYAL MACHINERY CO., LTD.
Technical Support
  • Ultrasonic Label Slitting MachineUltrasonic Label Slitting Machine2018/09/04As a kind of label slitting machine, ultrasonic label slitting machine uses the principle that ultrasonic vibration and friction produce heat energy instantaneously, so that the mold or cutter contact...
  • Features of Paper RewinderFeatures of Paper Rewinder2018/09/01Paper rewinder is a special equipment for mica tape and film. The rewinding process mainly accomplishes three tasks, the first is to remove the edge of the base paper; the second is to cut the whole b...
  • Paper Rewinder, Safety and Energy SavingPaper Rewinder, Safety and Energy Saving2018/08/29If we want to make profits, we must work safely. The paper rewinder should avoid danger in use, this is a very important link, and the main requirements are as follows: Check the electrical switch of ...
  • Advantages of TTR Slitting MachineAdvantages of TTR Slitting Machine2018/08/26Slitting machine is a kind of mechanical equipment that cuts wide paper or thin film into narrow strips of materials. It is often used in papermaking machinery, and printing and packaging machinery. T...

The Compositions and Characteristics of the Film Slitter Rewinder Machine The Compositions and Characteristics of the Film Slitter Rewinder Machine

The film slitter rewinder machine can be used for slitting polyester film, aluminized film, BOPP, LDPE, HDPE, LLDPE, PP and other films. The structure of the film slitter rewinder machine is compact and reasonable. The base and side plate are cast by gray iron, which is solid and reliable.

The film slitter rewinder machine is composed of unwinding mechanism, cutting mechanism, take-up mechanism, each functional roller, tension control, deviation rectification control and detection device. Its working principle is that the metallized film material released from the unwinding mechanism is passed through the flattening roll, the tension detecting roller, the feeding roller and the deviation correcting system, and then into the cutting mechanism. After the raw material is cut, the take-up mechanism is rolled into a standard film roll.

The instructions for use:

The film slitter rewinder machine adopts microcomputer control and magnetic powder clutch tension control. It uses center coiling method.

The host adopts frequency conversion speed regulation, automatic counting, alarm and other functions. The collection adopts A, B axis (inflatable) and A4 copy paper cutting performance.

It can be used for the normal cutting of irregular materials (or the gas-sensitive oil pressure type of the side system), which can be controlled by the PLC touch screen, and the cutter (or flat knife structure) of the cutter is used for automatic discharge.

The characteristics of the film slitter rewinder machine:

1. The machine adopts upper and lower air shaft winding, and the loading and unloading is very convenient.

2. The winding magnetic powder clutch controls the tension (optional automatic tension device).

3. The main engine frequency control; A constant speed rubber traction roll is used to keep the cutting speed constant.

4. It is equipped with automatic counting length, and we can set a certain length, automatic stop and other functions.

5. It is equipped with circular knife, knife edge and fan blowing device.

6. Some devices are automatically operated by air cylinder to make the operation easier and easier.

7. The machine is rolled with magnetic powder brake to control tension.

8. Unwinding material adopts automatic feeding device.

9. It is equipped with the photoelectric deviation, the photoelectric eye can be used to track the edges and colors of transparent materials. It can automatically track the edges of the cutting base materials to carry out precise strip cutting.

Related News
  • TEL:+86 0577-65652602 , +86 0577-58823960
  • EMAIL:ly@lyslitter.com
  • ADDRESS:No 88, Jinyuan Road, Dongshan Economic Development Zone, Ruian city Zhejiang province, China