RUIAN LOYAL MACHINERY CO., LTD.
RUIAN LOYAL MACHINERY CO., LTD.

9 Colors Logistics Label Flexographic Printing Machine

USE:It is suitable for printing paper, paper board, high-grade self-adhesive label and so on.Characteristic: A. The structure of the equipment is simple, easy to operate and maintain.B. The wire processi...
Contact Now
This 9 colors flexo printing machine  logistics label flexo printing machine is suitable for printing paper, paperboard, high-grade self-adhesive label and so on.  It is an auxiliary equipment of multi-color printing machine. At first glazing, it can increase the brightness of the product and the storage time of the product color. This printing machine can improve the quality of products and adopt the import stepless regulation of frequency conversion. It can also be used for printing monochrome stickers and various supermarket labels.
Technical Support
  • Ultrasonic Label Slitting MachineUltrasonic Label Slitting Machine2018/09/04As a kind of label slitting machine, ultrasonic label slitting machine uses the principle that ultrasonic vibration and friction produce heat energy instantaneously, so that the mold or cutter contact...
  • Features of Paper RewinderFeatures of Paper Rewinder2018/09/01Paper rewinder is a special equipment for mica tape and film. The rewinding process mainly accomplishes three tasks, the first is to remove the edge of the base paper; the second is to cut the whole b...
  • Paper Rewinder, Safety and Energy SavingPaper Rewinder, Safety and Energy Saving2018/08/29If we want to make profits, we must work safely. The paper rewinder should avoid danger in use, this is a very important link, and the main requirements are as follows: Check the electrical switch of ...
  • Advantages of TTR Slitting MachineAdvantages of TTR Slitting Machine2018/08/26Slitting machine is a kind of mechanical equipment that cuts wide paper or thin film into narrow strips of materials. It is often used in papermaking machinery, and printing and packaging machinery. T...
Features Specifiction

Features of 9 Colors Logistics Label Flexographic Printing Machine

USE:
It is suitable for printing paper, paper board, high-grade self-adhesive label and so on.

Characteristic:

A. The structure of the equipment is simple, easy to operate and maintain.

B. The wire processing ability is strong, the production cycle is short, and the work efficiency is high.

C. A new type of water-based ink and solvent based ink, non-toxic and pollution-free, fully meet the requirements of green environmental protection, and can also meet the requirements of food packaging. It is suitable for small or medium batch products.

D. The application materials are widely used, which can be applied to various materials, such as carton, paper, transparent film etc.

E. The printing quality is good, printing accuracy can reach 150 lines/inch, and the printed matter is rich in arragement, bright color and good visual effect, especially suitable for the requirement of packaging and printing.

During the normal printing operation of the printing press, the operator must constantly check the printing process and the printed matter. The use of the printed monitoring device is movable, and generally should be monitored in the position of the set of quasicross in the last color group or in the location of the points of the dot that is considered to be experienced. In the observation of the accurate monitoring of the printed set, we should pay attention to the accumulation of experience and refer to the printed sample so as to make the correct judgment. During normal production operations, we must constantly monitor the surface color, registration, ink volume, tension, ink viscosity and pH value of print, and find that problems need to be adjusted.

The cleaning of the rolls must be kept in the printing process. (no dry - solid ink is necessary to prevent the impact of the bearing, the printing and the life of the plate).

At the same time, keep the transmission gear clean. Because the splash ink drying in part will also lead to accurate alignment.

Generally speaking, the drying ability of printed material, printing plate and printing ink, the proficiency and operation process of printing operators, and the good condition of printing equipment determine the speed of printing machine.

To complete a good print, we must have a thorough understanding of the various materials used. The cooperation and selection of paper, ink, and subsequent processing should be communicated with the manufacturers in advance, and make each process work without affecting the quality of another assignment and strive to make the printed material perfect.

In the absence of test conditions, the printing materials should not be changed.

The qualified prints are the result of the coordinated work of the printing plate, the ink, the net roll and the flexo printer.

The printed products, samples and records are stored in the technical file to benefit the future summary of the experience and keep the same product in quality.

Quality identification standards for printed products:

1. The products are clean, no obvious dirty and incomplete.

2. The print is clear and complete, no pen shortage, not less than five words meaning acquisition.

3. The edge of the imprinting is smooth, no clear bar, no paste.

4. The color of the picture is bright, the color of the solid colors is thick, the layout is uniform and neat. The node is clear and complete;

5. The color reduction (neutral ash balance) is good.

6. The level of order adjustment is well reduced.

7. The accuracy of the graph and text is accurate.

8. The printing ink layer is firmly attached to the surface (the surface ink layer is firmly attached).

Specifiction 9 Colors Logistics Label Flexographic Printing Machine

Model

RY9-320

RY9-450

RY9-560

RY9-850

Printing speed

65m/min

65m/min

65m/min

65m/min

Printing color

9

9

9

9

Paper max width

320mm

450mm

560mm

560mm

Max printing width

310mm

440mm

550mm

550mm

Max unwinding diameter

600mm

600mm

600mm

600mm

Max rewinding diameter

550mm

550mm

550mm

550mm

Printing perimeter

175-320mm

175-320mm

175-320mm

175-320mm

Precision

±0.1mm

±0.1mm

±0.1mm

±0.1mm


Related Products


Leave a Message Email Us

we will contact you within 24 hours.

  • TEL:+86 0577-65652602 , +86 0577-58823960
  • EMAIL:ly@lyslitter.com
  • ADDRESS:No 88, Jinyuan Road, Dongshan Economic Development Zone, Ruian city Zhejiang province, China