Advantages of TTR Slitting Machine
Slitting machine is a kind of mechanical equipment that cuts wide paper or thin film into narrow strips of materials. It is often used in papermaking machinery, and printing and packaging machinery. The main characteristic of the slitter is that the magnetic powder clutch acts as a resistance device to output a DC voltage and control the resistance which produced by the magnetic powder clutch through system control. The main advantage is that it is a passive device and it can control smaller tension.
TTR slitting machine is suitable for the strip rewinding operation of all kinds of ribbons. The coiling tension is controlled by magnetic powder clutch. It can count automatically, adjust speed automatically by stages and turn the shaft automatically. It has high efficiency and high precision. It uses an automatic bracket to effectively control the swing of the reel in high-speed operation. It can be equipped with 1 and 1/2 reel.
Advantages of TTR slitting machine:
1. The main engine is driven by a variable frequency motor.
2. A magnetic powder brake is adopted for the unwinding tension, and the automatic tension control is adopted.
3. The winding is controlled by variable frequency motor and double station coiling is adopted.
4. Automatic meter counting and straight knife configuration.
5. Film and packaging automatically.
6. Pneumatic feeding is used when unwinding.
7. The whole machine is controlled by central PLC.
- September 11, 2017For the use of roller paper cutting machine, the corresponding codes of operation should be developed, it can be divided into work before and after work. Check whether all work positions are properly ...view
- September 11, 2017The development directions of domestic slitter are mainly in the following three aspects: 1. frame structure: whether a cutting or cutting two or three times, domestic machine manufacturers should ...view
- August 17, 2018Paper rewinder is a special equipment for mica tape and film. The rewinding process mainly accomplishes three tasks, the first is to remove the edge of the base paper; the second is to cut the whole b...view
- August 17, 2018The working principle of a thermal printer is that a semiconductor heating element is mounted on the printing head, and the printing head can print the desired pattern after heating and contacting the...view
- April 18, 2019Before use, the main components of the rewind slitter should be inspected and filled with oil. When inspecting and disassembingthe rewind slitter, it is strictly forbidden to use unsuitable tools and ...view
- August 17, 2018If we want to make profits, we must work safely. The paper rewinder should avoid danger in use, this is a very important link, and the main requirements are as follows: Check the electrical switch of ...view