RUIAN LOYAL MACHINERY CO., LTD.
RUIAN LOYAL MACHINERY CO., LTD.

Features of Paper Rewinder Features of Paper Rewinder

Paper rewinder is a special equipment for mica tape and film. The rewinding process mainly accomplishes three tasks, the first is to remove the edge of the base paper; the second is to cut the whole base paper into a number of width in line with user specifications; and the third is to control the roll diameter of the finished paper, so that it meets the factory specifications.

(1) Advantages of paper rewinder:

1. Equip and process with coreless, solid, rolled tubular toilet paper, the switch between products can be completed instantaneously.

2. Automatic trimming, glue spraying, sealing and shaft pulling are accomplished instantly synchronously, so that the rolled paper can be transferred to band saw for cutting and packaging without paper loss.

3. The pneumatic type of belt conveyor paper, rewinding shaft and each shaft base paper have independent regulatory agency of tension.

(2) Features of paper rewinder:

1. Its structure is compact and easy to operate.

2. Cutting grooves are arranged on the receiving platform.

3. The frequency conversion drive technology is used for winding, rolling and traction.

4. PLC programmable controller is used as core processing unit.

5. Touchscreen can be used as man-machine dialogue interface.

6. It is ontroled by high precision.

7. It can automatically attenuate tension and control taper.

8. The length to decelerate can be fixed.

9. The length to park can be fixed.

10. There are positive and reverse functions.

11. Static elimination function.
Related News
  • How to Operate the High-speed Slitting Machine?

    How to Operate the High-speed Slitting Machine?

    September 11, 2017Here, we'll learn a little bit about how to operate a high-speed slitting machine. 1. According to the instructions, install the upper and lower knives firstly and make adjustments to machine firstly....view
  • The Maintenance of the Cutting Machine①

    The Maintenance of the Cutting Machine①

    September 11, 20171. Check the pneumatic components every day. If there is a leak, repair it in time.2. Add NO. 30 oil to the slitting knife and pressure line wheel adjustment screw weekly, it can be seen that there is...view
  • On-off Process of Rewind Machine

    On-off Process of Rewind Machine

    April 18, 2019I. Start-up process1. Turn on the general power supply of rewind machine and the power supply of detection system in turn. Note: (1) Before turning on the power supply, make sure that the circuit is c...view
  • Mechanical Structure of the Rewind Machine

    Mechanical Structure of the Rewind Machine

    April 18, 2019There are many types of rewind machine, and other devices can be equipped in the rewind machine as needed to become a joint machine. The rewind machine can basically be divided into the following five...view
  • The Process Requirements for Laminating Machine

    The Process Requirements for Laminating Machine

    September 11, 20171. The paper cutting machine will fit in rolls or sheets of raw materials for fixed length cutting processing, such as plastic packaging materials, packaging boxes, plates, film, leather, wood and cut...view
  • Operational Specification for High Speed Slitting Machine

    Operational Specification for High Speed Slitting Machine

    April 18, 2019Pay attention to safety when feeding into high speed slitting machine. Push the material to the right position to inflate, pay attention to the direction of rotation of the material can not be reverse...view
  • TEL:+86 0577-65652602 , +86 0577-58823960
  • EMAIL:ly@lyslitter.com
  • ADDRESS:No 88, Jinyuan Road, Dongshan Economic Development Zone, Ruian city Zhejiang province, China