Ultrasonic Label Slitting Machine
As a kind of label slitting machine, ultrasonic label slitting machine uses the principle that ultrasonic vibration and friction produce heat energy instantaneously, so that the mold or cutter contacts the ultrasonic vibration surface under the pressure of cylinder, so as to achieve the cutting effect. Ultrasonic label slitting machine adopts PLC console, automatic feeding, eye tracking scanning, at the same time it uses sensors to track the position of the trademark cutting, and equipped with anti-static device, which can remove a large number of static electricity generated when cutting off.
Ultrasonic cutting is accomplished by high speed friction and cutter pressure. The cutter of ultrasonic strip cutter is usually a sharp angle below 60 degrees, so we must adjust the cutter's limit accurately during the debugging process. Cutter and ultrasonic steel die are not completely contacted. When pressing, it needs to be broken by ultrasonic vibration friction, otherwise the cutting tool of ultrasonic strip cutter will wear out quickly under the impact of high pressure, and will also affect the life of ultrasonic mold.
Features of ultrasonic label slitting machine:
1. It is counted by computer, and it has high accuracy and fast speed.
2. The adjustment of length is simple, quick and efficient.
3. The incision is complete and beautiful, trimming is neat, soft and not scattered.
4. It can automatically store the parameters set, such as truncation length and cutting number.
- September 11, 2017The trademarkdiving and cutting machine is an equipment which is used to cut the wide androll materials vertically. Therefore, this word is applied in all walks oflife. We can get to know this work fr...view
- September 11, 2017The feeding of the paper cutting machine: according to the requirements of the cutting plan, and in accordance with the operating rules of driving, and according tothe actual situation, it hangs the c...view
- August 17, 2018Paper rewinder is a special equipment for mica tape and film. The rewinding process mainly accomplishes three tasks, the first is to remove the edge of the base paper; the second is to cut the whole b...view
- September 11, 20171. Be good at the maintenance work. First of all, the daily maintenance should be in place, its standard is, smooth, clean, liquidations (no dust, no debris) in place, ensure the equipment's sliding p...view
- September 11, 2017The common quality problems in the cutting process of high-speed cutting machine:1. The vertical stripesThe main expression is the appearance of the surface of the film roll forming a ring of ribs, li...view
- September 11, 2017The adhesive slitter rewinder machine consists of a rack, a raw material mechanism including air expansion shaft uncoil, rectifying mechanism, regulating wheel and oil pressure material handling devic...view