RUIAN LOYAL MACHINERY CO., LTD.
RUIAN LOYAL MACHINERY CO., LTD.

How to Prolong the Service Life of Adhesive Slitter Rewinder Machine? How to Prolong the Service Life of Adhesive Slitter Rewinder Machine?

The price of an adhesive slitter rewinder machine is not cheap, everyone wants to buy machines that are longer and more stable, however, to achieve this goal, the daily maintenance is very important. The main parts of the automatic slitter rewinder machine should be checked before use and filled with lubricating oil; It is strictly forbidden to use improper tools and non-scientific operation methods when inspecting and dismantling the automatic slitter rewinder machine. To do a good job of daily maintenance and maintenance of the adhesive slitter rewinder machine, we should do the following five points.

1. The electric part should be cleaned and checked regularly, timely cleaning the hidden trouble.

2. The slitter rewinder machine is done by slitting machine, cutting machine, so we should use high quality slitting knife and crosscutting knife.

3. The cutting machine's daily maintenance should be in place, its criterion is, smooth, clean, liquidated (dustless, no sundry) in place, ensure the sliding position of the equipment is in good condition.

4. It is maintenance work, we should stop periodic and irregular inspection of the rotating parts (especially for the vulnerable parts to stop real-time monitoring). We should carry out regular adjustment and change the commutator regularly, and make detailed records to reach the purpose of prolonging the service life of the equipment.

5. To improve the technical quality and degree of the operators, the control of local operation should be done by the special person, without permission, no one should operate on their own.

In addition, the machines should be thoroughly cleaned and checked every two weeks; If the automatic slitter rewinder machine is not used for a long time, all bright surfaces must be wiped clean and coated with anti-rust oil and covered with plastic covers; If the automatic slitter rewinder machine stops for more than 3 months, moisture-proof paper should be covered in anti-rust oil; After the work is completed, we should clean the equipment carefully and clean the surface of the rubbing surface and add the lubricating oil.

Related News
  • How to Operate the High-speed Slitting Machine?

    How to Operate the High-speed Slitting Machine?

    September 11, 2017Here, we'll learn a little bit about how to operate a high-speed slitting machine. 1. According to the instructions, install the upper and lower knives firstly and make adjustments to machine firstly....view
  • Mechanical Structure of the Rewind Machine

    Mechanical Structure of the Rewind Machine

    April 18, 2019There are many types of rewind machine, and other devices can be equipped in the rewind machine as needed to become a joint machine. The rewind machine can basically be divided into the following five...view
  • The Notice and Classification of Roll Paper Cross-cutting Machine

    The Notice and Classification of Roll Paper Cross-cutting Machine

    September 11, 2017For the use of roller paper cutting machine, the corresponding codes of operation should be developed, it can be divided into work before and after work. Check whether all work positions are properly ...view
  • On-off Process of Rewind Machine

    On-off Process of Rewind Machine

    April 18, 2019I. Start-up process1. Turn on the general power supply of rewind machine and the power supply of detection system in turn. Note: (1) Before turning on the power supply, make sure that the circuit is c...view
  • Operational Specification for High Speed Slitting Machine

    Operational Specification for High Speed Slitting Machine

    April 18, 2019Pay attention to safety when feeding into high speed slitting machine. Push the material to the right position to inflate, pay attention to the direction of rotation of the material can not be reverse...view
  • The Process Requirements for Laminating Machine

    The Process Requirements for Laminating Machine

    September 11, 20171. The paper cutting machine will fit in rolls or sheets of raw materials for fixed length cutting processing, such as plastic packaging materials, packaging boxes, plates, film, leather, wood and cut...view
  • TEL:+86 0577-65652602 , +86 0577-58823960
  • EMAIL:ly@lyslitter.com
  • ADDRESS:Building 2#, No. 3588, Development Zone Avenue, Ruian, China