RUIAN LOYAL MACHINERY CO., LTD.
RUIAN LOYAL MACHINERY CO., LTD.

HC-1300/1600 Multifunctional Laminating Slitting Machine

Ultrasonic rectification---automatic detection and rectification---high accurate magnetic powder clutch---the unwinding and rewinding tension can be controlled---response sensitively---low noise.
Contact Now
Technical Support
  • Control Technology of Automatic Rewind Machine 2019-06-13 As the last working procedure of paper industry, the automatic rewind machine is the fastest running mechanical equipment in paper machinery. Its speed can reach 1500-1800 m/min, or even up to 3000 m/...
  • Basic Knowledge and Development of Automatic Slitter 2019-06-06 In the modern packaging industry, automatic slitter is an important equipment which is often used before and after printing. The main raw materials such as paper, plastic film and so on are sliced bef...
  • Operational Specification for High Speed Slitting Machine 2019-05-30 Pay attention to safety when feeding into high speed slitting machine. Push the material to the right position to inflate, pay attention to the direction of rotation of the material can not be reverse...
  • On-off Process of Rewind Machine 2019-05-23 I. Start-up process1. Turn on the general power supply of rewind machine and the power supply of detection system in turn. Note: (1) Before turning on the power supply, make sure that the circuit is c...
Features Machine System Specifiction

Features of HC-1300/1600 Multifunctional Laminating Slitting Machine

USE of HC-1300/1600 Multifunctional Laminating Slitting Machine

This type of slitting machine is the HC series of more wide compact slitting and rewinding solutions for available materials.

The automatic slitting machine is professional for industrial tapes, such as double sticky tape, heat-resistant tapes, masking tapes of plated circuit and so on.  And cellophane tapes, protective film, which can protect the screen of smartphones effectively, are widely used. Besides, other materials like opper foil, aluminum foil, OPP, PP, PE, PVC, paper, clothes etc. is suitable for this series of machine to slit and laminate. Because of its large application, this series of machine is highly supposed to be used in printing, packaging, electronics, leather, plastics and other industries.

Characteristic of HC-1300/1600 Multifunctional Laminating Slitting Machine

The unwind roll of this model of slitting machine of adhesive label has been expanded much, reaching 1300 millimeters at most. So there is more possiblities for you to slit adhesive label rolls with a larger size. And of course, you can freely choose the automatic counter, counting by each, or counting by each meter according to your purpose, which helps us to enlarge its application. Besides, we’ve prepare the technology of automatically turning off, to save your unnecessary cost of electricity.

This machine is able to stick and slit equipment with high precision and high sensitivity. Automatic detection, rectification, metering, unwinding and rewinding tension controlled can be realized. It is characterized by accurate slitting, fast slitting speed, ease of operation and maintenance, etc.

Unwind
Knife
Rewind
  • 1
    Air shaft
  • 2
    Ultrasonic rectification system used in automatic inspection and automatic correcting system (high precision)
  • 3
    Magnetic powder brake be used to control unwinding tension
  • 4
    Polyurethane used in rubber covered roller make it more wearproof
  • 5
    Aluminum rod after Hardness oxide (protection materials and scratch-proof)
  • 6
    Cylinder provide the power to the movement of rubber covered roller
  • 7
    variable frequency motor is used
  • 2
    Automatic countering or metering
  • 1
    Shear cutter system (sharp, flexible and slitting efficiently)
  • 1
    Air shaft
  • 2
    Magnetic powder clutch is adopted to control the tension

Specifiction HC-1300/1600 Multifunctional Laminating Slitting Machine

Technical parameter:
Machine model HC-1300 HC-1600
Unwinding width 1300mm 1600mm
Machine speed 100m/min 100m/min
Slitting precision ±0.03mm ±0.03mm
Unwinding diameter Φ800mm
Φ800mm
Laminating diameter Φ300mm
Φ300mm
Rewinding diameter 2×Φ450mm
2×Φ450mm
Main motor power 3kw, 6 pole 3kw, 6 pole
Installation dimension 2900×2000×1300mm 3000×2400×1300mm
Machine weight 2000kg 2300kg


Related Products


Leave a Message Email Us

we will contact you within 24 hours.