How to Load Material, Operate Membrane Anchor and Grafting Film of Paper Cutting Machine ?
The feeding of the paper cutting machine: according to the requirements of the cutting plan, and in accordance with the operating rules of driving, and according to
the actual situation, it hangs the corresponding parent roll on the aging rack. According to the inside and outside of the corona, we choose direction on rolling
rack cutting machine and clamp the steel core with the control button and leave the steel core supporting arm and driving.
The film passing of the paper cutting machine: when there is no film on the paper cutting machine,
it is necessary to wear film. By using the cutting machine and the
function key, the original film end is attached to the diaphragm link eye, and
then we should start the film button to make the membrane along the cutting process to be
smooth and distributed on each roll.
The connecting film of the paper cutting machine: when the paper pipe machine has the film, and then we should change the
joint and use the vacuum to connect the stage. First, the diaphragm stage
will be activated to work position. The membrane on the first traction roll of
the cutting machine will be drawn and the upper vacuum pump suction film will
be activated.The film is
attached to the diaphragm stage, with double sided tape and the extraneous
membrane of the tape. The film on the rack will be flatten out and the
lower vacuum pump will be activated to make the membrane level off. The
joint should be neat and no-wrinkle, then turn off the vacuum pump, and drive
the membrane to the non-working position.
Related News