Before use the TTR slitting machine
, the main parts of the TTR slitting machine
should be inspected and lubricated. When inspecting the machine, it is strictly prohibited to use inappropriate tools and adopt unscientific operation methods. The machine should be thoroughly cleaned and inspected every two weeks; if the TTR slitting machine
is not used for a long time, all the bright surfaces must be wiped clean, coated with rust-proof oil, covered with plastic sleeve to cover the whole machine. If the TTR slitting machine
has been shut down for more than 3 months, the anti-rust oil should be coated with damp-proof paper. After the work is finished, the equipment should be cleaned carefully, and the exposed friction surface should be wiped clean and lubricated.
The following five points should be made for the daily maintenance of the TTR slitting machine
1. The local parts of electrical appliances should be regularly cleaned and checked to eliminate the hidden dangers in time.
2. TTR slitting machine is used by longitudinal cutter, cross-cutting machine to complete, so, to use high-quality longitudinal cutter and cross-cutting knife.
3. TTR slitting machine should have daily maintenance, its criterion is smooth, clean, clearing in place to ensure that the sliding parts of the equipment in good condition.
4. Do a good job of maintenance, and check the rotation parts regularly and irregularly. Have regular adjustment, regular replacement, use commutator and do a good job of careful recording to achieve the purpose of prolonging the service life of equipment.
6. To improve the technical quality of the personnel who operate the carbon strip cutting machine. As for the person who controls the operation of local machines, must be a professional. No one can operate without permission.