As a supporting industry in many areas of the national economy, the packaging industry has benefited from the prosperity of other industries, and its technological progress and supporting services hav...
In addition, it may be that your tension or film threading method during the unwinding and stretching process has never been adjusted properly, causing the film to wrinkle. It may be that the unwindin...
Paper with burrs is a common problem when using paper slitter. The width of paper material rolls will generally be 3-5mm greater than the size marked on it, and only special conditions will jump out o...
The slitting process is a very critical in the production of plastic film, composite packaging, printing and other industries. The slitting process is generally the last step before packaging, and the...
In our daily life, packaging materials are widely used, especially in snack food, wet wipes, drinks, powder and other products. They have rich and colorful packaging materials, and most of these packa...
As the information carrier of modern intelligent systems, RFID tags are increasingly used in various fields, which not only endows traditional tags with infinite possibilities, but also contributes to...
Slitter rewinder machine is a machine to convert mother material rolls to narrower ones. Slitting effect of slitter rewinder is affected by many factors.1. Unwinding tension controlTry to avoid changi...
The factors that cause fluctuations and changes in tension are often complex, and the main influencing factors are roughly as follows:1. The change in the speed of the machine will inevitably cause ch...
Heat transfer film is a significant material in heat transfer process in which the pattern on the film is transferred to the surface of the mold product by applying the heat and pressure.It is widely ...
Ⅰ. What is Fluorine release film?Fluorine release film, is also known as fluorine film. As you can see in the picture, it is based on PET film and coated with fluorinated silicones release agent on i...
I. Future data of PP film application marketIt is predicted that the market consumption of PP film will explode from 2020 to 2025. PP film accounted for 41.7% of the global single material plastic pac...
According to the latest research analysis, driven by the epidemic, global packaging production has developed faster than ever. However, the development of packaging production has caused many countrie...
1. The importance of flexible packaging film slitter rewinderThe plastic packaging film market has a compound annual growth rate of 3.5%. In 2019, its market size is 20.44 million tons (55.9 billion U...
The application of optical films began in the 1930s. In modern times, optical films have been widely used in the fields of optics and optoelectronic technology.It has received increasing attention fro...
Pay attention to safety when feeding into high speed slitting machine. Push the material to the right position to inflate, pay attention to the direction of rotation of the material can not be reverse...
There are many types of rewind machine, and other devices can be equipped in the rewind machine as needed to become a joint machine. The rewind machine can basically be divided into the following five...
Paper rewinder is a special equipment for mica tape and film. The rewinding process mainly accomplishes three tasks, the first is to remove the edge of the base paper; the second is to cut the whole b...
If we want to make profits, we must work safely. The paper rewinder should avoid danger in use, this is a very important link, and the main requirements are as follows: Check the electrical switch of ...
High-speed cutting machine is a powerful cutting machine, mainly used for papermaking, post-printing processing, packaging and so on. It is able to cut the wide roll paper into 1, 400 square sheets. T...
Everyone knows that dust always has a lot of harm for high-tech things, and high-speed cutting machine is a kind of high precision equipment of paper cutting, so it is very easy to be affected by the ...
The common quality problems in the cutting process of high-speed cutting machine:1. The vertical stripesThe main expression is the appearance of the surface of the film roll forming a ring of ribs, li...
Here, as one of the professional slitting machine suppliers, we'll show you a little bit about how to operate a high-speed slitting machine.1. According to the instructions, install the upper and ...
The development directions of domestic slitter are mainly in the following three aspects:1. frame structure: whether a cutting or cutting two or three times, domestic machine manufacturers should inve...
The protection film cutting machine produced by our company is a high quality product which is recognized by experts in post-printing processing equipment industry. We insist that any organization est...
Flexible die1. Clean the flexible die: Before taking out the flexible die and using it, be sure to clean the back of the flexible die thoroughly2. Clean the magnetic cylinder: before attaching the fle...
Self-adhesive label material is a kind of self-adhesive material, and hot-melt adhesive is selected as its adhesive. Die cutting hot-melt self-adhesive materials is relatively difficult, and the probl...
Die-cutting flying label is a common problem in the daily production of self-adhesive label die cutting. Die-cutting flying label refers to the phenomenon in which die-cutting material has been comple...
Rotary die cutting machine is a die-cutting way of by using flexible die to cut out of shapes from the material. The flexible die is sticked to the magnetic cylinder. Since the magnetic cylinder is ro...
Die cutting is an important part of the self-adhesive label manufacturing process, especially most rolls of self-adhesive labels need to be die-cut after printing. Flat knife is one of the mainstream ...
In the actual production process, there are many troubles caused by the wear and tear of the die-cutting tools, and even some inexplicable problems occur. It cannot be used or the die-cutting effect i...
1. If you want to minus the pressure, rotate the screw by anti-clock direction.2. If you want to increase the pressure, rotate the screw by clock direction.
In the actual production process, there are many troubles caused by die-cutting tool wear, and even some problems make it difficult to know the reason. For example, some die-cutting knives can be used...
Die cutting is the important procedure of label production.Under the label die cutting procedure, we always face some problems ,these problems lead the productivity decrease much ,even will cause the ...
I. The development trend of the global adhesive label marketCurrently, the main markets for adhesive labels are food and beverage, consumer durables, pharmaceuticals, home and personal care products, ...
The high-speed cutting machine, as the name suggests, is the paper cutting machine with high speed running. It has high machining efficiency and high precision, which is widely used in paper-making an...
Ⅰ. The development of cross cutting machinery industry needs innovationNo matter what kind of mechanical product it is, it is always essential to make innovations if you want to keep up with the time...
Ⅰ. The advantages of the rapid development of the cross cut machineAs the times and demands change, today's Hamburg paper cross-cutting machine is no longer a single cross-cutting equipment. On t...
Ⅰ. Industry application of cross cut machineThe cross-cutting machine can be used for the cutting of coated paper, coated paper, kraft paper, and other paper and paper-plastic composites, plastic she...
1. The development and changes of Hamburger paper cross cutting machinery1) Digitization: At present, most of the cross-cutting machines are controlled by computers. With the continuous development of...
Ⅰ. The automation development of the cross cutting machineThe cross cutting machine can be applied to the cutting of coated paper, kraft paper and other papers and paper-plastic composites, plastic s...
The feeding of the paper cutting machine: according to the requirements of the cutting plan, and in accordance with the operating rules of driving, and according to the actual situation, it hangs the ...
1. Paper cutting machine will fit in rolls or sheets of raw materials for fixed length cutting processing, such as plastic packaging materials, packaging boxes, plates, film, leather, wood and cutting...
The cross-cutting machine is different from the transmission control mode. The computer crosscutting machine is controlled by the industrial control computer. With the setting length and the control o...
1 What is the crosscutting machine blade?Cutting machine Blade is one of the important parts of paper cutter, and is widely used in paper printing industry.Cutting machine blade is used in paper, prin...
For the use of roller paper cutting machine, the corresponding codes of operation should be developed, it can be divided into work before and after work. Check whether all work positions are properly ...
1. Be good at the maintenance work. First of all, the daily maintenance should be in place, its standard is smooth, clean, liquidations (no dust, no debris) in place, ensure the equipment's slidin...
1. Check the pneumatic components every day. If there is a leak, repair it in time.2. Add NO. 30 oil to the slitting knife and pressure line wheel adjustment screw weekly, it can be seen that there is...
Liang Ye machinery is dedicated to the development and selling of cutting machine. Today we will analyze the advantages of the hot dividing and cutting machine:1. It has control system of frequency co...
The trademark diving and cutting machine is an equipment which is used to cut the wide and roll materials vertically. Therefore, this word is applied in all walks of life. We can get to know this work...
Color management is always an unavoidable topic in printing industry. Because the essence of printing is a copy of the original, and color reproduction is a factor that must be considered. Since the i...
Self-adhesive label is a composite material with paper, film or other special materials as a facial material, adhesive on the back, and silicon-coated protective paper as the backing paper. And after ...
Proper flexographic plate storage plays a vital role in achieving high quality flexographic printing. Therefore, the following points should be noted in the daily storage process:(1) Keep it in a plac...
Poor ink adhesion is a common problem for flexo printing. Here are some suggestions to solve the issue.1) If the substrate does not match the ink, it needs to be replaced. For plastic film materials, ...
Film self-adhesive material is a polymer, and its surface is not absorbent to printing ink. The surface energy of film self-adhesive material is low, and it must be pretreated before printing to meet ...
Ⅰ. Printing actual combat: notes for scraping ink label printing!Now, due to the strong development of the Internet, there are more and more two-dimensional code, bar code and query code labels used ...
1. The development of label digital printing of sticker label printing machineAt present, personalized high-end customized red wine is more and more popular, but as a reflection of the quality of red ...
1. Industry development of digital label sticker printing machineAccording to statistics, the average annual growth rate of China's label sticker printing machine industry has reached more than 20...
Ⅰ. The application of flexo printing machine in the field of digital packagingThe prosperity of this market has promoted the development of the packaging industry and even the entire printing industr...
Ⅰ. The development of flexo printing machines in the global printing marketIn 2017, the overall volume of the global printing market was 48.8 trillion US dollars. The report points out that the globa...
With the advent of the digital age, fast printing has become a new pursuit of people. Digital printing technology has attracted people's attention due to its advantages of simple operation, short ...
Ⅰ. Market prospects of the label printing machineAccording to data from the Smith Peel Institute, digital printing only accounted for 6.9% of label printing in 2010, and by 2016, this figure had clim...
Ⅰ. The data analysis of the market of flexo paper printing machineA few days ago, the latest research report "Future Outlook of the Global Printing Market" by the Smithers Peel Institute, a...
Ⅰ. The analysis report of label sticker printing machine industryAccording to the report, the current output value of label printing in the North American market is 12.9 billion, with a compound annu...
Ⅰ. The sustainable development direction of flexo label printing machineIn recent years, with the gradual improvement of people's awareness of environmental protection, green printing is receivin...
Ⅰ. The market growth rate of flexographic printing machineThe flexographic printing machine uses fluid ink with strong fluidity. The ink is transferred from the ink fountain rubber roller and the ani...
1. The growth record of flexible packagingBecause of consumer's preference for convenient and sustainable packaging, flexible packaging has become one of the fastest-growing packaging in the packa...
In recent years, flexographic printing plate production has developed rapidly in the printing industry worldwide with its unique environmental protection advantages. For example, according to statisti...
1. Development background of flexographic printing machineFlexographic printing has become the fastest growing and most potential printing process in the printing industry today, and it is growing rap...
With the rapid development of e-commerce, the demand for online shopping has soared, orders on e-commerce platforms have skyrocketed, and the demand for express delivery is strong. The logistics packa...
Print quality can be affected by sixteen surface characteristics of the substrate.+ –ABSORBENCY+ –MOISTURE RESISTANCE+ –REFLECTANCE+ –STRENGTH+ –DIE BLADES+ –MATRIX STRIPPING+ –MATERIAL STREN...
According to the latest market survey, the recent fierce competition in the printing and packaging market requires not only high-quality and diversified products, but also need green environmental fri...
1. Analysis of the status quo of the development of the slitting rewinding machine industry1) For industry structure analysis, the slitting rewinding machine industry is centralized. From a regional p...
Ⅰ. The rapid development of China's adhesive label slitting machine industryAccording to data from the China Printing and Equipment Industry Association, the total output value of China's lab...
I. The development background of lithium battery pole piece slitting machineAccording to the prediction of relevant industry research institutions, the market demand of lithium power will reach 694.26...
I. Labels are more and more importantAccording to the research data, the global market is expected to reach $32.99 billion by 2025, and the market is expected to grow at a compound annual rate of 6% o...
1. The importance of the packaging machinery industryThe packaging machinery develops healthily and rapidly and its development velocity keeps ahead in the machinery industry. The growth of the packag...
The global flexible plastic packaging market size is projected to grow from USD 160.8 billion in 2020 to USD 200.5 billion by 2025, at a CAGR of 4.5% from 2020 to 2025. It is estimated that by 2024, t...
1. Development status of PVC filmPVC film is low in price, has excellent chemical resistance and insulation properties. It is very good for signage panels. The global usage of PVC film ranks second am...
Overview: Self-developed high-speed label slitting machine, equipped with high-end full servo, rewinding and unwinding taper tension system and correction system, PLC program and touch screen man-mach...
Before use, the main components of the rewind slitter should be inspected and filled with oil. When inspecting and disassembing the rewind slitter, it is strictly forbidden to use unsuitable tools and...
As a kind of label slitting machine, ultrasonic label slitting machine uses the principle that ultrasonic vibration and friction produce heat energy instantaneously, so that the mold or cutter contact...
Nowadays, non-woven fabrics are used more and more widely and they are closely bond up people's lives,non-woven fabrics are popular as a kind of new materials because of their environmental protec...
1. The paper cutting machine will fit in rolls or sheets of raw materials for fixed length cutting processing, such as plastic packaging materials, packaging boxes, plates, film, leather, wood and cut...
The adhesive slitter rewinder machine consists of a rack, a raw material mechanism including air expansion shaft uncoil, rectifying mechanism, regulating wheel and oil pressure material handling devic...
The price of an adhesive slitter rewinder machine is not cheap, everyone wants to buy machines that are longer and more stable, however, to achieve this goal, the daily maintenance is very important. ...
The global flexible plastic packaging market size is projected to grow from USD 160.8 billion in 2020 to USD 200.5 billion by 2025, at a CAGR of 4.5% from 2020 to 2025. It is estimated that by 2024, t...
First of all, Raloyal's commission is: To create and provide value to customers.Before delivery, Raloyal packs the machine as:Foam + 4 sides paper board + stretch film packing as the outer layer.T...
Incoming material inspectionClear warehousingFactory testingMachine will be tested strictly according to the production order (customer demand )must be approved by each item of the file as flowsAfter ...
As we all know, various printing and production difficulties are often encountered in the process of sticker printing production, which makes workshop personnel very headache. In this article, we will...
Generally, printed patterns are formed by printing with multiple ink colors, and the accuracy of overprinting directly affects the quality of the images and even leads to the scrap of printed products...
Features of relief dotDuring the review process, for relief works, our focus is on whether the works can overcome their inherent characteristic defects in various printing techniques. For relief works...
The ideal large volume adhesive material to be cut should have neat edges, consistent internal tension, and good concentricity. However, in actual production, there are many factors that can cause var...
Industry trends of high-speed slitting machinesWith the gradual promotion of automatic packaging equipment in the packaging industry, such as food packaging and cigarette packaging, the requirements f...
Die cutting is an important process in the production of adhesive labels. During the die cutting process of adhesive labels, we often encounter some problems that can greatly reduce production efficie...
English 
中文 
français 
Deutsch 
Español 
português 
العربية 
Ελλάδα 
Polska 
беларускі 
български 
Türkçe 