RUIAN LOYAL MACHINERY CO., LTD.
RUIAN LOYAL MACHINERY CO., LTD.

Care and Maintenance of Rewind Slitter Care and Maintenance of Rewind Slitter

Before use, the main components of the rewind slitter should be inspected and filled with oil. When inspecting and disassembing the rewind slitter, it is strictly forbidden to use unsuitable tools and unscientific operation methods;  The machine should be thoroughly cleaned and inspected every two weeks; if the rewind slitter stops working for a long time, all the bright surfaces must be wiped clean, coated with anti-rust oil, and covered with a plastic cover to cover the whole machine.

For example, if the rewind slitter is deactivated for more than 3 months, the anti-rust oil should be covered with moisture-proof paper; after the work is completed, it should carefully clean the equipment, wipe the exposed friction surface and add lubricant. The following five points should be done for the daily care and maintenance of the rewind slitter.

First, the electrical parts should be cleaned and inspected regularly to remove hidden dangers in time.

Second, the use of the rewind slitter is done by the slitter and the crosscutting machine. Therefore, it is necessary to use a high-quality slitting knife and a cross-cutting knife.

Third, the daily maintenance of the rewind slitter should be in place. The guidelines are: smooth, clean, clear, dust-free, and no debris in place to ensure that the sliding part of the equipment is in good condition.

Fourth, it is maintenance work. Regular and irregular inspections of the rotating parts are required (especially for consumable parts to be monitored in real time). Regular adjustments are made, the commutators are changed regularly, and detailed records are made to achieve the purpose of extending the service life of the equipment.

Fifth, it is necessary to improve the technical quality and degree of the personnel who operate the rewind slitter. Regarding the local operation of the control, it is necessary to be taken over by a special person, and no one is allowed to operate it without any consent. 
Related News
  • How to Operate the High-speed Slitting Machine? 2017-12-25 Here, we'll learn a little bit about how to operate a high-speed slitting machine. 1. According to the instructions, install the upper and lower knives firstly and make adjustments to machine firstly....
  • Advantages of TTR Slitting Machine 2018-08-26 Slitting machine is a kind of mechanical equipment that cuts wide paper or thin film into narrow strips of materials. It is often used in papermaking machinery, and printing and packaging machinery. T...
  • Operating Procedures of Rotary Slitting Machinery 2019-04-18 The operator must be trained before taking up the post and must be familiar with the operation method of different rotary slitting machinery and the performance of equipment and general maintenance me...
  • High Speed Cutting Machine to Help the Label Industry to Resume Production 2020-11-07 According to the latest research analysis, driven by the epidemic, global packaging production has developed faster than ever. However, the development of packaging production has caused many countrie...
  • On-off Process of Rewind Machine 2019-05-23 I. Start-up process1. Turn on the general power supply of rewind machine and the power supply of detection system in turn. Note: (1) Before turning on the power supply, make sure that the circuit is c...
  • The Influence of Dust on High-speed Slitting Machine Can Not Be Ignored 2018-01-15 Everyone knows that dust always has a lot of harm for high-tech things, and high-speed cutting machine is a kind of high precision equipment of paper cutting, so it is very easy to be affected by the ...